Standard Features for Chamber
Item | Specification |
400*500*500mm | |
External dimension(W*D*H) | 600*1080*1380mm |
Working capacity | 100 liter |
Internal chamber material | SUS 304 stainless steel, mirror finished |
External chamber material | Stainless steel with paint spray |
Temperature range | -70 +180 |
Temperature fluctuation | 1C |
Humidity range | 10% 98%RH |
Humidity fluctuation | 2.5%RH |
Humidity uniformity | 3%RH |
Sample tray | SUS 304 stainless steel, 2pcs |
Observation window | Tempered glass: 250*300mm |
Testing hole | Diameter 50mm, for cable routing |
Power supply source | Three-phase, 380V, 50Hz |
Safety protection device | Protection for leakage Over-temperature Compressor over-voltage and overload Heater short circuit |
Temperature Ramp System(Heating & Cooling)
Model | HD-E708-100 | |
15/min, linear line or non-linear control (without loading) | ||
Heating speed (-40 +85) | 15/min, linear line or non-linear control (without loading) | |
Refrigeration Unit | System | Air-cooled |
Compressor | France Tecumseh | |
Expansion system | Electronic expansion valve | |
Refrigerant | R404A, R23 |
Applications
Cyclic Test Includes Climatic Conditions: Holding Test, Cooling-Off Test, Heating-Up Test, And Drying Test
Chamber Design Features
Programmable Controller
HAIDA INTERNATIONAL EQUIPMENT CO., LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |